x530L Series

Stackable Intelligent Layer 3 Switches

The Allied Telesis x530L Series stackable Layer 3 switches feature high capacity, resiliency and easy management, making them the ideal choice for network access applications.

x530L Series

Overview

The Allied Telesis x530L Series are a high-performing and feature-rich choice for today’s networks. A choice of 24 or 48 Gigabit ports and 4 x 10 Gigabit uplinks, combined with the ability to stack multiple units, make the x530L Series a versatile solution for enterprise applications.

Power over Ethernet Plus (PoE+) models enable connecting and powering wireless access points, IP surveillance cameras, and other devices.

Powerful network management

Allied Telesis Autonomous Management Framework™ (AMF) automates many everyday tasks including configuration management, easing the workload of modern networks. The entire network can be managed as a single virtual device with powerful centralized features. Growing the network can be accomplished with plug-and-play simplicity, and network node recovery is fully zero-touch.

AMF secure mode increases network security with management traffic encryption, authorization and monitoring. AMF Guestnode allows third-party devices, such as IP phones and security cameras, to be part of the AMF network.

Resilient

Today’s converging online services mean there is increasing demand for highly-available networks with minimal downtime. Allied Telesis Virtual Chassis Stacking (VCStack™), in conjunction with link aggregation, provides a network with no single point of failure and application resiliency.

x530L Series switches can form a VCStack of up to eight units for enhanced resiliency and simplified device management. Mixed stacking allows the x530L Series to stack with x530 Series Switches. Virtual Chassis Stacking over Long Distance (VCStack™ LD), which enables stacks to be created over long distance fiber links, makes the x530L Series the perfect choice for distributed environments too.

Allied Telesis Ethernet Protection Switched Ring (EPSRing™), and the standards-based G.8032 Ethernet Ring Protection, ensure that distributed network segments have high-speed, resilient access to online resources and applications.

Reliable

The x530L Series was designed with reliability in mind, and guarantees continual delivery of essential services. With dual built-in Power Supply Units (PSUs) and near-hitless online stack reconfiguration, maintenance can be performed without affecting network uptime.

Secure

A secure network environment is guaranteed. The x530L Series offers powerful control over network traffic types, secure management options, loop guard to protect against cabling mistakes, and tri-authentication for comprehensive access control.

Future proof

The x530L Series ensures a future-proof network, with superior flexibility and the ability to stack multiple units. All x530L models feature 10 Gigabit uplink ports and a comprehensive IPv6 feature set, to ensure they are ready for future network traffic demands.

Environmentally friendly

The x530L Series supports Energy Efficient Ethernet (EEE), automatically reducing the power consumed by the switch whenever there is no traffic on a port. This sophisticated feature significantly lowers operating costs by reducing the power requirements of the switch and any associated cooling equipment.

Key Features

Allied Telesis Autonomous Management Framework (AMF)

  • AMF is a sophisticated suite of management tools that provide a simplified approach to network management. Powerful features like centralized management, auto-backup, auto-upgrade, auto-provisioning and auto-recovery enable plug-and-play networking and zero-touch management.
  • Any x530L Series switch can operate as the AMF network master, storing firmware and configuration backups for other network nodes. The AMF master enables auto-provisioning and auto-upgrade by providing appropriate files to new network members. New network devices can be pre-provisioned, making installation easy because no onsite configuration is required.
  • AMF Guestnode allows Allied Telesis wireless APs and other switching products, as well as third-party devices such as IP phones and security cameras, to be part of an AMF network.

Virtual Chassis Stacking (VCStack)

  • Create a VCStack of up to 8 units with 40 Gbps of stacking bandwidth for each unit. Stacking links are connected in a ring so each device has dual connections to further improve resiliency. VCStack provides a highly-available system where network resources are spread out across stacked units, reducing the impact if one of the units fails. Aggregating switch ports on different units across the stack provides excellent network resiliency.
  • Mixed stacking allows the x530L Series to stack with x530 Series switches, providing flexible deployment options.

Long-Distance Stacking (VCStack LD)

  • VCStack LD allows a VCStack to be created over longer distances, perfect for distributed network environments.

Ethernet Protection Switched Ring (EPSRing)

  • EPSRing and 10 Gigabit Ethernet allow several x530L Series switches to form high-speed protected rings capable of recovery within as little as 50ms. This feature is perfect for high performance and high availability in enterprise networks.
  • Super-Loop Protection (SLP) enables a link between two EPSR nodes to be in separate EPSR domains, improving redundancy and network fault resiliency.

G.8032 Ethernet Ring Protection

  • G.8032 provides standards-based high-speed ring protection, that can be deployed stand-alone, or interoperate with Allied Telesis EPSR.
  • Ethernet Connectivity Fault Monitoring (CFM) proactively monitors links and VLANs, and provides alerts when a fault is detected.

Power over Ethernet Plus (PoE+)

  • With PoE, a separate power connection to media endpoints such as IP phones and wireless access points is not necessary. PoE+ reduces costs and provides even greater flexibility, providing the capability to connect devices requiring more power (up to 30 Watts) such as pan, tilt and zoom security cameras.
  • The x530L Series allows the configuration of the overall power budget, as well as the power limit per port.

Active Fiber Monitoring (AFM)

  • AFM prevents eavesdropping on fiber communications by monitoring received optical power. If an intrusion is detected, the link can be automatically shut down, or an operator alert can be sent.

Continuous PoE

  • Continuous PoE allows the switch to be restarted without affecting the supply of power to connected devices. Smart lighting, security cameras, and other PoE devices will continue to operate during a software upgrade on the switch.

High Reliability

  • The x530L Series feature front to back cooling and dual PSUs.

Voice VLAN

  • Voice VLAN automatically separates voice and data traffic into two different VLANs. This automatic separation places delay-sensitive traffic into a voice-dedicated VLAN, which simplifies QoS configurations.

sFlow

  • sFlow is an industry-standard technology for monitoring high-speed switched networks. It provides complete visibility into network use, enabling performance optimization, usage accounting/billing, and defense against security threats. Sampled packets sent to a collector ensure it always has a real-time view of network traffic.

VLAN Mirroring (RSPAN)

  • VLAN mirroring allows traffic from a port on a remote switch to be analysed locally. Traffic being transmitted or received on the port is duplicated and sent across the network on a special VLAN.

Optical DDM

  • Most modern optical SFP/SFP+/QSFP transceivers support Digital Diagnostics Monitoring (DDM). This enables real time monitoring of various parameters of the transceiver, such as optical output power, temperature, laser bias current and transceiver supply voltage. Easy access to this information simplifies diagnosing problems with optical modules and fiber connections.

Tri-authentication

  • Authentication options on the x530L Series also include alternatives to IEEE 802.1x port-based authentication, such as web authentication to enable guest access and MAC authentication for endpoints that do not have an IEEE 802.1x supplicant. All three authentication methods—IEEE 802.1x, MAC-based and Web-based—can be enabled simultaneously on the same port for tri-authentication.

TACACS+ Command Authorization

  • Centralized control over which commands may be issued by a specific AlliedWare Plus device users. TACACS+ command authorization complements authentication and accounting services for a complete AAA solution.

Premium Software License

  • By default, the x530L Series offers a comprehensive Layer 2 and basic Layer 3 feature set that includes static routing and IPv6 management features. The feature set can easily be elevated to full Layer 3 by applying the premium software license. This adds dynamic routing protocols and Layer 3 multicasting capabilities.

VLAN Access Control List (ACLs)

  • Simplify access and traffic control across entire segments of the network. ACLs can be applied to a VLAN as well as a specific port.

Dynamic Host Configuration Protocol (DHCP) Snooping

  • DHCP servers allocate IP addresses to clients, and the switch keeps a record of addresses issued on each port. IP source guard checks against this DHCP snooping database to ensure only clients with specific IP and/or MAC address can access the network. DHCP snooping can be combined with other features, like dynamic ARP inspection, to increase security in Layer 2 switched environments, and also provides a traceable history, which meets the growing legal requirements placed on service providers.

Software Defined Networking (SDN)

  • OpenFlow is a key technology that enables the use of SDN to build smart applications that unlock value and reduce cost.
x530L-52GPX network

Resilient distribution switching

The x530L Series are ideal for distribution solutions, where resiliency and flexibility are required. In the above diagram, distribution switches utilize long-distance Virtual Chassis Stacking (VCStack LD) to create a single virtual unit out of multiple devices. By using fiber stacking connectivity, units can be kilometers apart—perfect for a distributed environment. Mixed stacking allows the x530L Series and x530 Series switches to be stacked together for even more deployment flexibility.

When combined with link aggregation, VCStack provides a solution with no single point of failure that fully utilizes all network bandwidth.

The x530L Series supports Enterprises and their use of business-critical online resources and applications, with a resilient and reliable distribution solution.

Power at the network edge

The PoE models can provide 740 Watts of power, making the full 30 Watts of PoE+ available to high-power endpoints. This flexible PoE solution can power today’s most advanced devices, including PTZ cameras with heaters/blowers, enhanced lighting management, wireless access points and more.

Dual internal PSUs provide redundancy, while Continuous PoE ensures power delivery to endpoints even during a switch firmware upgrade.

With advanced security and access control features, and built-in resiliency, the x530L Series are the ideal choice for connecting and powering devices at the network edge.

PRODUCT 10/100/1000T (RJ-45) COPPER PORTS 1/10 GIGABIT SFP+ PORTS STACKING PORTS POE+ ENABLED PORTS SWITCHING FABRIC FORWARDING RATE
x530L-28GTX 24 4 2* - 128Gbps 95.2Mpps
x530L-28GPX(1) 24 4 2* 24 128Gbps 95.2Mpps
x530L-52GTX 48 4 2* - 176Gbps 130.9Mpps
x530L-52GPX 48 4 2* 48 176Gbps 130.9Mpps

* Stacking ports can be configured as additional 1G/10G Ethernet ports when unit is not stacked

(1) The x530L-28GPX model available in 2020

Performance

  • 40Gbps of stacking bandwidth using front panel 10G SFP+ ports
  • Supports 10KB jumbo frames
  • Wirespeed multicasting
  • 4094 configurable VLANs
  • 16K MAC addresses
  • Up to 1250 OpenFlow v1.3 entries
  • 1GB DDR3 SDRAM, 256MB NAND flash memory
  • Packet buffer memory: 3MB

Reliability

  • Modular AlliedWare Plus operating system
  • Full environmental monitoring of PSUs, fans, temperature and internal voltages. SNMP traps alert network managers in case of any failure

Expandability

  • Stack up to eight units in a VCStack
  • Versatile licensing options for additional features

Flexibility and Compatibility

  • 10G SFP+ ports will support any combination of Allied Telesis 1000Mbps SFP and 10GbE SFP+ modules and direct attach cables listed in this document under Ordering Information
  • Port speed and duplex configuration can be set manually or by auto-negotiation
  • Front-panel SFP+ stacking ports can be configured as 1G/10G Ethernet ports

Diagnostic Tools

  • Connectivity Fault Management (CFM) - Continuity Check Protocol (CCP) for use with G.8032 ERPS
  • Built-In Self Test (BIST)
  • Ping polling and TraceRoute for IPv4 and IPv6
  • Optical Digital Diagnostic Monitoring (DDM)
  • Find-me device locator
  • Automatic link flap detection and port shutdown
  • Cable fault locator (TDR)
  • Uni-Directional Link Detection (UDLD)
  • Active Fiber Monitoring detects tampering on optical links
  • Port and VLAN mirroring (RSPAN)

IPv4 Features

  • Equal Cost Multi Path (ECMP) routing
  • Static unicast and multicast routing for IPv4
  • UDP broadcast helper (IP helper)
  • Directed broadcast forwarding
  • Black hole routing
  • DNS relay
  • Policy-based routing
  • Route redistribution (OSPF, RIP, and BGP)

IPv6 Features

  • Device management over IPv6 networks with SNMPv6, Telnetv6 and SSHv6
  • IPv4 and IPv6 dual stack
  • Log to IPv6 hosts with Syslog v6
  • NTPv6 client and server
  • DNSv6 client, DNSv6 relay
  • DHCPv6 client and relay
  • Static IPv6 unicast and multicast routing
  • IPv6 aware storm protection and QoS
  • IPv6 hardware ACLs

Management

  • Industry-standard CLI with context-sensitive help
  • Built-in text editor and powerful CLI scripting engine
  • Comprehensive SNMP MIB support for standards-based device management
  • Console management port on the front panel for ease of access
  • Event-based triggers allow user-defined scripts to be executed upon selected system events
  • Eco-friendly mode allows ports and LEDs to be disabled to save power
  • USB interface allows software release files, configurations and other files to be stored for backup and distribution to other devices
  • Front panel 7-segment LED provides at-a-glance status and fault information
  • Autonomous Management Framework (AMF) enables powerful centralized management and zero-touch device installation and recovery. Try AMF for free with the built-in Starter license
  • Web-based Graphical User Interface (GUI)

Quality of Service

  • IP precedence and DiffServ marking based on Layer 2, 3 and 4 headers
  • Queue scheduling options for strict priority, weighted round robin or mixed scheduling
  • Taildrop for queue congestion control
  • Extensive remarking capabilities
  • Policy-based QoS based on VLAN, port, MAC and general packet classifiers
  • Limit bandwidth per port or per traffic class down to 64kbps
  • 8 priority queues with a hierarchy of high priority queues for real time traffic, and mixed scheduling, for each switch port
  • Policy-based storm protectionl
  • Wirespeed traffic classification with low latency essential for VoIP and real-time streaming media applications

Resiliency Features

  • EPSRing (Ethernet Protection Switched Rings) with SuperLoop Protection (SLP) and enhanced recovery
  • STP root guard
  • Loop protection: thrash limiting and loop detection
  • Dynamic link failover (host attach)
  • Control Plane Prioritization (CPP) ensures the CPU always has sufficient bandwidth to process network control traffic
  • PVST+ compatibility mode
  • VCStack fast failover minimizes network disruption
  • SFP+ stacking ports can be configured as 10G Ethernet ports
  • Long-Distance VCStack with 10G SFP+ modules (VCStack LD)
  • BPDU forwarding

Security Features

  • MAC address filtering and MAC address lock-down
  • Port-based learn limits (intrusion detection)
  • Access Control Lists (ACLs) based on layer 3 and 4 headers
  • Private VLANs provide security and port isolation for multiple customers using the same VLAN
  • Secure Copy (SCP)
  • BPDU protection
  • Network Access and Control (NAC) features manage endpoint security
  • Dynamic VLAN assignment
  • Tri-authentication: MAC-based, web-based and IEEE 802.1x
  • DoS attack blocking and virus throttling
  • DHCP snooping, IP source guard and Dynamic ARP Inspection (DAI)
  • Strong password security and encryption
  • Auth fail and guest VLANs
  • Secure File Transfer Protocol (SFTP) client
  • Authentication, Authorisation and Accounting (AAA)
  • Bootloader can be password protected for device security
  • Configurable ACLs for management traffic
  • RADIUS group selection per VLAN or port

Software Defined Networking (SDN)

  • OpenFlow v1.3 with support for encryption, connection interruption and inactivity probe

Environmental Specifications

  • Operating temperature range:
0°C to 50°C (32°F to 122°F)
  • Storage temperature range:
-25°C to 70°C (-13°F to 158°F)
  • Operating relative humidity range:
5% to 90% non-condensing
  • Storage relative humidity range:
5% to 95% non-condensing
  • Operating altitude:
3,048 meters maximum (10,000 ft)

    Electrical Approvals and Compliances

    • EMC: EN55032 class A, FCC class A, VCCI class A, ICES-003 class A
    • Immunity: EN55024, EN61000-3-levels 2 (Harmonics), and 3 (Flicker) – AC models only

    Safety

    • Standards: UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1
    • Certification: UL, cUL

    Restrictions on Hazardous Substances (RoHS) Compliance

    • EU RoHS compliant
    • China RoHS compliant

    Physical Specifications

    PRODUCT WIDTH x DEPTH x HEIGHT MOUNTING UNPACKAGED WEIGHT PACKAGED WEIGHT PACKAGED DIMENSIONS
    x530L-28GTX 441 x 323 x 44 mm
    (17.36 x 12.72 x 1.73 in)
    Rack-mount 4.4 kg (9.07 lbs) 6.3 kg (13.89 lbs) 577 x 440 x 153 mm
    (22.72 x 17.32 x 6.02 in)
    x530L-28GPX(1) 441 x 421 x 44 mm
    (17.36 x 16.57 x 1.73 in)
    Rack-mount 6.2 kg (13.67 lbs) 8.4 kg (18.52 lbs) 577 x 548 x 153 mm
    (22.72 x 21.57 x 6.02 in)
    x530L-52GTX 441 x 323 x 44 mm
    (17.36 x 12.72 x 1.73 in)
    Rack-mount 5.2 kg (11.46 lbs) 7.1 kg (15.65 lbs) 577 x 440 x 153 mm
    (22.72 x 17.32 x 6.02 in)
    x530L-52GPX 441 x 421 x 44 mm
    (17.36 x 16.57 x 1.73 in)
    Rack-mount 6.7 kg (14.77 lb) 8.9 kg (19.62 lb) 577 x 548 x 153 mm
    (22.72 x 21.57 x 6.02 in)

    Power and Noise Characteristics

    6.0A max per input (28GPX/52GPX), 1.0A max per input (28GTX/52GTX)  
      NO POE LOAD FULL POE+ LOAD   POE SOURCING PORTS
    PRODUCT MAX POWER CONSUMPTION (W) MAX HEAT DISSIPATION (BTU/H) NOISE (DBA) MAX POWER CONSUMPTION (W) MAX HEAT DISSIPATION (BTU/H) NOISE (DBA) MAX POE POWER POE (7.5W) POE (15.4W) POE (30W)
    x530L-28GTX 39 133 42* - - - - - - -
    x530L-28GPX(1) 70 239 42* 890 3037 42* 740 24 24 24
    x530L-52GPX 60 205 42* - - - - - - -
    x530L-52GPX 95 324 42* 950 3242 42* 740 48 48 24

    Noise: tested to ISO7779; front bystander position

    Latency (microseconds)

      PORT SPEED
    PRODUCT 10MBPS 100MBPS 1GBPS 10GBPS
    x530L-28GTX 29.91µs 6.06µs 3.98µs 1.63µs
    x530L-28GPX(1) 29.91µs 6.06µs 3.98µs 1.63µs
    x530L-52GTX 30.98µs 8.34µs 5.27µs 1.67µs
    x530L-52GPX 30.98µs 8.34µs 5.27µs 1.67µs

     

    (1) The x530L-28GPX model available in 2020

    AlliedWare Plus Operating System

    Version 5.4.9-2

    Authentication
    RFC 1321
    MD5 Message-Digest algorithm
    RFC 1828
    IP authentication using keyed MD5
    Border Gateway Protocol (BGP)

    BGP dynamic capability
    BGP outbound route filtering

    RFC 1772
    Application of the Border Gateway Protocol (BGP) in the Internet
    RFC 1997
    BGP communities attribute
    RFC 2385
    Protection of BGP sessions via the TCP MD5 signature option
    RFC 2439
    BGP route flap damping
    RFC 2858
    Multiprotocol extensions for BGP-4
    RFC 2918
    Route refresh capability for BGP-4
    RFC 3392
    Capabilities advertisement with BGP-4
    RFC 3882
    Configuring BGP to block Denial-of-Service (DoS) attacks
    RFC 4271
    Border Gateway Protocol 4 (BGP-4)
    RFC 4360
    BGP extended communities
    RFC 4456
    BGP route reflection - an alternative to full mesh iBGP
    RFC 4724
    BGP graceful restart
    RFC 4893
    BGP support for four-octet AS number space
    RFC 5065
    Autonomous system confederations for BGP
    Cryptographic Algorithms
    FIPS Approved Algorithms

    Encryption (Block Ciphers):

    • AES (ECB, CBC, CFB and OFB Modes)
    • 3DES (ECB, CBC, CFB and OFB Modes)

    Block Cipher Modes:

    • CCM
    • CMAC
    • GCM
    • XTS

    Digital Signatures & Asymmetric Key Generation:

    • DSA
    • ECDSA
    • RSA

    Secure Hashing:

    • SHA-1
    • SHA-2 (SHA-224, SHA-256, SHA-384. SHA-512)

    Message Authentication:

    • HMAC (SHA-1, SHA-2(224, 256, 384, 512)

    Random Number Generation:

    • DRBG (Hash, HMAC and Counter)
    Non FIPS Approved Algorithms

    RNG (AES128/192/256)
    DES
    MD5

    Encryption (management traffic only)
    FIPS 180-1
    Secure Hash standard (SHA-1)
    FIPS 186
    Digital signature standard (RSA)
    FIPS 46-3
    Data Encryption Standard (DES and 3DES)
    Ethernet Standards

    IEEE 802.2 Logical Link Control (LLC)
    IEEE 802.3 Ethernet
    IEEE 802.3ab 1000BASE-T
    IEEE 802.3ae 10 Gigabit Ethernet
    IEEE 802.3af Power over Ethernet (PoE)
    IEEE 802.3at Power over Ethernet up to 30W (PoE+)
    IEEE 802.3az Energy Efficient Ethernet (EEE)
    IEEE 802.3u 100BASE-X
    IEEE 802.3x Flow control - full-duplex operation
    IEEE 802.3z 1000BASE-X

    IPv4 Features
    RFC 768
    User Datagram Protocol (UDP)
    RFC 791
    Internet Protocol (IP)
    RFC 792
    Internet Control Message Protocol (ICMP)
    RFC 793
    Transmission Control Protocol (TCP)
    RFC 826
    Address Resolution Protocol (ARP)
    RFC 894
    Standard for the transmission of IP datagrams over Ethernet networks
    RFC 919
    Broadcasting Internet datagrams
    RFC 922
    Broadcasting Internet datagrams in the presence of subnets
    RFC 932
    Subnetwork addressing scheme
    RFC 950
    Internet standard subnetting procedure
    RFC 951
    Bootstrap Protocol (BootP)
    RFC 1027
    Proxy ARP
    RFC 1035
    DNS client
    RFC 1042
    Standard for the transmission of IP datagrams over IEEE 802 networks
    RFC 1071
    Computing the Internet checksum
    RFC 1122
    Internet host requirements
    RFC 1191
    Path MTU discovery
    RFC 1256
    ICMP router discovery messages
    RFC 1518
    An architecture for IP address allocation with CIDR
    RFC 1519
    Classless Inter-Domain Routing (CIDR)
    RFC 1542
    Clarifications and extensions for BootP
    RFC 1591
    Domain Name System (DNS)
    RFC 1812
    Requirements for IPv4 routers
    RFC 1918
    IP addressing
    RFC 2581
    TCP congestion control
    IPv6 Features
    RFC 1981
    Path MTU discovery for IPv6
    RFC 2460
    IPv6 specification
    RFC 2464
    Transmission of IPv6 packets over Ethernet networks
    RFC 2711
    IPv6 router alert option
    RFC 3484
    Default address selection for IPv6
    RFC 3587
    IPv6 global unicast address format
    RFC 3596
    DNS extensions to support IPv6
    RFC 4007
    IPv6 scoped address architecture
    RFC 4193
    Unique local IPv6 unicast addresses
    RFC 4213
    Transition mechanisms for IPv6 hosts and routers
    RFC 4291
    IPv6 addressing architecture
    RFC 4443
    Internet Control Message Protocol (ICMPv6)
    RFC 4861
    Neighbor discovery for IPv6
    RFC 4862
    IPv6 Stateless Address Auto-Configuration (SLAAC)
    RFC 5014
    IPv6 socket API for source address selection
    RFC 5095
    Deprecation of type 0 routing headers in IPv6
    RFC 5175
    IPv6 Router Advertisement (RA) flags option
    RFC 6105
    IPv6 Router Advertisement (RA) guard
    Management

    AT Enterprise MIB including AMF MIB and SNMP traps
    Optical DDM MIB
    SNMPv1, v2c and v3

    IEEE 802.1AB
    Link Layer Discovery Protocol (LLDP)
    RFC 1155
    Structure and identification of management information for TCP/IP-based Internets
    RFC 1157
    Simple Network Management Protocol (SNMP)
    RFC 1212
    Concise MIB definitions
    RFC 1213
    MIB for network management of TCP/IP-based Internets: MIB-II
    RFC 1215
    Convention for defining traps for use with the SNMP
    RFC 1227
    SNMP MUX protocol and MIB
    RFC 1239
    Standard MIB
    RFC 1724
    RIPv2 MIB extension
    RFC 2578
    Structure of Management Information v2 (SMIv2)
    RFC 2579
    Textual conventions for SMIv2
    RFC 2580
    Conformance statements for SMIv2
    RFC 2674
    Definitions of managed objects for bridges with traffic classes, multicast filtering and VLAN extensions
    RFC 2741
    Agent extensibility (AgentX) protocol
    RFC 2787
    Definitions of managed objects for VRRP
    RFC 2819
    RMON MIB (groups 1,2,3 and 9)
    RFC 2863
    Interfaces group MIB
    RFC 3176
    sFlow: a method for monitoring traffic in switched and routed networks
    RFC 3411
    An architecture for describing SNMP management frameworks
    RFC 3412
    Message processing and dispatching for the SNMP
    RFC 3413
    SNMP applications
    RFC 3414
    User-based Security Model (USM) for SNMPv3
    RFC 3415
    View-based Access Control Model (VACM) for SNMP
    RFC 3416
    Version 2 of the protocol operations for the SNMP
    RFC 3417
    Transport mappings for the SNMP
    RFC 3418
    MIB for SNMP
    RFC 3621
    Power over Ethernet (PoE) MIB
    RFC 3635
    Definitions of managed objects for the Ethernet-like interface types
    RFC 3636
    IEEE 802.3 MAU MIB
    RFC 4022
    MIB for the Transmission Control Protocol (TCP)
    RFC 4113
    MIB for the User Datagram Protocol (UDP)
    RFC 4188
    Definitions of managed objects for bridges
    RFC 4292
    IP forwarding table MIB
    RFC 4293
    MIB for the Internet Protocol (IP)
    RFC 4318
    Definitions of managed objects for bridges with RSTP
    RFC 4502
    RMON 2
    RFC 4560
    Definitions of managed objects for remote ping, traceroute and lookup operations
    RFC 5424
    The Syslog protocol
    RFC 6527
    Definitions of managed objects for VRRPv3
    Multicast Support

    Bootstrap Router (BSR) mechanism for PIM-SM
    IGMP query solicitation
    IGMP snooping (IGMPv1, v2 and v3)
    IGMP snooping fast-leave
    IGMP/MLD multicast forwarding (IGMP/MLD proxy)
    MLD snooping (MLDv1 and v2)
    PIM and PIM SSM for IPv6

    RFC 1112
    Host extensions for IP multicasting (IGMPv1)
    RFC 2236
    Internet Group Management Protocol v2 (IGMPv2)
    RFC 2710
    Multicast Listener Discovery (MLD) for IPv6
    RFC 2715
    Interoperability rules for multicast routing protocols
    RFC 3306
    Unicast-prefix-based IPv6 multicast addresses
    RFC 3376
    IGMPv3
    RFC 3810
    Multicast Listener Discovery v2 (MLDv2) for IPv6
    RFC 3956
    Embedding the Rendezvous Point (RP) address in an IPv6 multicast address
    RFC 3973
    PIM Dense Mode (DM)
    RFC 4541
    IGMP and MLD snooping switches
    RFC 4601
    Protocol Independent Multicast - Sparse Mode (PIM-SM): protocol specification (revised)
    RFC 4604
    Using IGMPv3 and MLDv2 for source-specific multicast
    RFC 4607
    Source-specific multicast for IP
    Open Shortest Path First (OSPF)

    OSPF link-local signaling
    OSPF MD5 authentication
    Out-of-band LSDB resync

    RFC 1245
    OSPF protocol analysis
    RFC 1246
    Experience with the OSPF protocol
    RFC 1370
    Applicability statement for OSPF
    RFC 1765
    OSPF database overflow
    RFC 2328
    OSPFv2
    RFC 2370
    OSPF opaque LSA option
    RFC 2740
    OSPFv3 for IPv6
    RFC 3101
    OSPF Not-So-Stubby Area (NSSA) option
    RFC 3509
    Alternative implementations of OSPF area border routers
    RFC 3623
    Graceful OSPF restart
    RFC 3630
    Traffic engineering extensions to OSPF
    RFC 4552
    Authentication/confidentiality for OSPFv3
    RFC 5329
    Traffic engineering extensions to OSPFv3
    RFC 5340
    OSPFv3 for IPv6 (partial support)
    Quality of Service (QoS)
    IEEE 802.1p
    Priority tagging
    RFC 2211
    Specification of the controlled-load network element service
    RFC 2474
    DiffServ precedence for eight queues/port
    RFC 2475
    DiffServ architecture
    RFC 2597
    DiffServ Assured Forwarding (AF)
    RFC 2697
    A single-rate three-color marker
    RFC 2698
    A two-rate three-color marker
    RFC 3246
    DiffServ Expedited Forwarding (EF)
    Resiliency Features
    ITU-T G.8023 / Y.1344
    Ethernet Ring Protection Switching (ERPS)
    IEEE 802.1ag
    CFM Continuity Check Protocol (CCP)
    IEEE 802.1AX
    Link aggregation (static and LACP)
    IEEE 802.1D
    MAC bridges
    IEEE 802.1s
    Multiple Spanning Tree Protocol (MSTP)
    IEEE 802.1w
    Rapid Spanning Tree Protocol (RSTP)
    IEEE 802.3ad
    Static and dynamic link aggregation
    RFC 5798
    Virtual Router Redundancy Protocol version 3 (VRRPv3) for IPv4 and IPv6
    Routing Information Protocol (RIP)
    RFC 1058
    Routing Information Protocol (RIP)
    RFC 2080
    RIPng for IPv6
    RFC 2081
    RIPng protocol applicability statement
    RFC 2082
    RIP-2 MD5 authentication
    RFC 2453
    RIPv2
    Security Features

    SSH remote login
    SSLv2 and SSLv3
    TACACS+ Accounting, Authentication and Authorisation (AAA)

    IEEE 802.1X
    authentication protocols (TLS, TTLS, PEAP and MD5)
    IEEE 802.1X
    multi-supplicant authentication
    IEEE 802.1X
    port-based network access control
    RFC 2560
    X.509 Online Certificate Status Protocol (OCSP)
    RFC 2818
    HTTP over TLS (“HTTPS”)
    RFC 2865
    RADIUS authentication
    RFC 2866
    RADIUS accounting
    RFC 2868
    RADIUS attributes for tunnel protocol support
    RFC 2986
    PKCS #10: certification request syntax specification v1.7
    RFC 3546
    Transport Layer Security (TLS) extensions
    RFC 3579
    RADIUS support for Extensible Authentication Protocol (EAP)
    RFC 3580
    IEEE 802.1x RADIUS usage guidelines
    RFC 3748
    PPP Extensible Authentication Protocol (EAP)
    RFC 4251
    Secure Shell (SSHv2) protocol architecture
    RFC 4252
    Secure Shell (SSHv2) authentication protocol
    RFC 4253
    Secure Shell (SSHv2) transport layer protocol
    RFC 4254
    Secure Shell (SSHv2) connection protocol
    RFC 5246
    Transport Layer Security (TLS) v1.2
    RFC 5280
    X.509 certificate and Certificate Revocation List (CRL) profile
    RFC 5425
    Transport Layer Security (TLS) transport mapping for Syslog
    RFC 5656
    Elliptic curve algorithm integration for SSH
    RFC 6125
    Domain-based application service identity within PKI using X.509 certificates with TLS
    RFC 6614
    Transport Layer Security (TLS) encryption
    for RADIUS
    RFC 6668
    SHA-2 data integrity verification for SSH
    Services
    RFC 854
    Telnet protocol specification
    RFC 855
    Telnet option specifications
    RFC 857
    Telnet echo option
    RFC 858
    Telnet suppress go ahead option
    RFC 1091
    Telnet terminal-type option
    RFC 1350
    Trivial File Transfer Protocol (TFTP)
    RFC 1985
    SMTP service extension
    RFC 2049
    MIME
    RFC 2131
    DHCPv4 (server, relay and client)
    RFC 2132
    DHCP options and BootP vendor extensions
    RFC 2616
    Hypertext Transfer Protocol - HTTP/1.1
    RFC 2821
    Simple Mail Transfer Protocol (SMTP)
    RFC 2822
    Internet message format
    RFC 3046
    DHCP relay agent information option (DHCP option 82)
    RFC 3315
    DHCPv6 (server, relay and client)
    RFC 3633
    IPv6 prefix options for DHCPv6
    RFC 3646
    DNS configuration options for DHCPv6
    RFC 3993
    Subscriber-ID suboption for DHCP relay agent option
    RFC 4330
    Simple Network Time Protocol (SNTP) version 4
    RFC 5905
    Network Time Protocol (NTP) version 4
    VLAN Support

    Generic VLAN Registration Protocol (GVRP)

    IEEE 802.1ad
    Provider bridges (VLAN stacking, Q-in-Q)
    IEEE 802.1Q
    Virtual LAN (VLAN) bridges
    IEEE 802.1v
    VLAN classification by protocol and port
    IEEE 802.3ac
    VLAN tagging
    Voice over IP (VoIP)

    LLDP-MED ANSI/TIA-1057
    Voice VLAN

    NAME DESCRIPTION INCLUDES STACK LICENSING
    AT-FL-x530L-01 x530L Premium license OSPFv2 (256 routes)
    BGP4 (256 routes)
    PIMv4-SM, DM and SSM v4
    VLAN double tagging (Q-in-Q)
    RIPng (256 routes)
    OSPFv3 (256 routes)
    MLDv1/v2
    PIM-SMv6/SSMv6
    RADIUS-Full
    UDLD
    One license per stack member
    AT-FL-x530-AM20-1YR AMF Master license AMF Master 20 nodes for 1 year One license per stack
    AT-FL-x530-AM20-5YR AMF Master license AMF Master 20 nodes for 5 years One license per stack
    AT-FL-x530L-8032 ITU-T G.8032 license G.8032 ring protection
    Ethernet CFM
    One license per stack member
    AT-FL-x530L-CPOE Continuous PoE license Continuous PoE power One license per stack member
    AT-FL-x53L-MSTK Mixed Stacking license Stack x530L with x530 Series switches One license per stack member
    AT-FL-x530L-OF13-1YR OpenFlow license OpenFlow v1.3 (1250 entries) for 1 year Not supported on a stack
    AT-FL-x530L-OF13-5YR OpenFlow license OpenFlow v1.3 (1250 entries) for 5 years Not supported on a stack

    Model availability can vary between regions. Please check to see which models are available in your region.

    Switches

    19inch rack-mount brackets included

    AT-x530L-28GTX-xx

    24-port 10/100/1000T stackable switch with 4 SFP+
    ports and 2 fixed power supplies

    AT-x530L-28GPX-xx (1)

    24-port 10/100/1000T PoE+ stackable switch with 4 SFP+
    ports and 2 fixed power supplies

    AT-x530L-52GTX-xx

    48-port 10/100/1000T stackable switch with 4 SFP+
    ports and 2 fixed power supplies

    (1) The x530L-28GPX model available in 2020

    AT-x530L-52GPX-xx

    48-port 10/100/1000T PoE+ stackable switch with 4 SFP+
    ports and 2 fixed power supplies

     

    Where xx =
    10 for US power cord
    20 for no power cord
    30 for UK power cord
    40 for Australian power cord
    50 for European power cord

    10G SFP+ Modules

    Any 10G SFP+ module or cable can be used for stacking with the front panel 10G ports

    AT-SP10SR

    10GSR 850 nm short-haul, 300 m with MMF

    AT-SP10SR/I

    10GSR 850 nm short-haul, 300 m with MMF,
    industrial temperature

    AT-SP10LRM

    10GLRM 1310 nm short-haul, 220 m with MMF

    AT-SP10LR

    10GLR 1310 nm medium-haul, 10 km with SMF

    AT-SP10LR/I

    10GLR 1310 nm medium-haul, 10 km with SMF,
    industrial temperature

    AT-SP10LR20/I

    10GER 1310nm long-haul, 20 km with SMF,
    industrial temperature

    AT-SP10ER40/I

    10GER 1310nm long-haul, 40 km with SMF,
    industrial temperature

    AT-SP10ZR80/I

    10GER 1550nm long-haul, 80 km with SMF,
    industrial temperature

    AT-SP10T (2),(3)

    10GBase-T 20 m copper

    AT-SP10BD10/I-12

    10G Bi-Di, 1270 nm TX/1330 nm RX, 10km,
    industrial temperature, TAA(4)

    AT-SP10BD10/I-13

    10G Bi-Di, 1330 nm TX/1270 nm RX, 10km,
    industrial temperature, TAA(4)

    AT-SP10BD20-12

    10G Bi-Di, 1270 nm TX/1330 nm RX, 20km, TAA(4)

    AT-SP10BD20-13

    10G Bi-Di, 1330 nm TX/1270 nm RX, 20km, TAA(4)

    AT-SP10BD40/I-12

    10G Bi-Di, 1270 nm TX/1330 nm RX, 40km,
    industrial temperature, TAA(4)

    AT-SP10BD40/I-13

    10G Bi-Di, 1330 nm TX/1270 nm RX, 40km,
    industrial temperature, TAA(4)

    AT-SP10TW1

    1 meter SFP+ direct attach cable

    AT-SP10TW3

    3 meter SFP+ direct attach cable

    (2)Using Cat 6a/7 cabling
    (3)Up to 100 m running at 1G

    1000Mbps SFP Modules

    AT-SPTX

    10/100/1000T 100 m copper

    AT-SPTX/I

    100 m, 10/100/1000T SFP, RJ-45, industrial temperature

    AT-SPSX

    1000SX GbE multi-mode 850 nm fiber up to 550 m

    AT-SPSX/I

    1000SX GbE multi-mode 850 nm fiber up to 550 m, industrial temperature

    AT-SPEX

    1000X GbE multi-mode 1310 nm fiber up to 2 km

    AT-SPLX10

    1000LX GbE single-mode 1310 nm fiber up to 10 km

    AT-SPLX10/I

    1000LX GbE single-mode 1310 nm fiber up to 10 km, industrial temperature

    AT-SPBD10-13

    1000LX GbE Bi-Di (1310 nm Tx, 1490 nm Rx) fiber up to 10 km

    AT-SPBD10-14

    1000LX GbE Bi-Di (1490 nm Tx, 1310 nm Rx) fiber up to 10 km

    AT-SPBD20-13/I

    1000BX GbE Bi-Di (1310 nm Tx, 1550 nm Rx) fiber up to 20 km

    AT-SPBD20-14/I

    1000BX GbE Bi-Di (1490 nm Tx, 1310 nm Rx) fiber up to 20 km

    AT-SPLX40

    1000LX GbE single-mode 1310 nm fiber up
    to 40 km

    AT-SPBD40-13/I

    1000LX GbE single-mode Bi-Di (1310 nm Tx, 1490 nm Rx) fiber up to 40 km, industrial temperature

    AT-SPBD40-14/I

    1000LX GbE single-mode Bi-Di (1490 nm Tx, 1310 nm Rx) fiber up to 40 km, industrial temperature

    AT-SPZX80

    1000ZX GbE single-mode 1550 nm fiber up to 80 km

    AT-SPZX120/I

    1000ZX GbE single-mode 1550 nm fiber up to 120 km