Document Library

This document contains useful technical tips and tricks for AlliedWare Plus Managed switches.

This guide describes the current AlliedWare Plus VXLAN implementation.

This guide describes Multicast Source Discovery Protocol (MSDP) and how to configure it.

Saving configuration for hardware that is not currently present is called provisioning. This guide describes provisioning under AlliedWare Plus.

This How To Note describes how to use ping polling and triggers to achieve a redundant link failover mechanism, known as the Host Attach solution.

This document describes how to configure Allied Telesis switches for maximum security, network stability and ease of management.

This How To Note describes the key characteristics of video surveillance networks, and how to conserve camera CPU processing capacity and cater for STP topology changes.

User's Guide: AT-DC2552XS Management Software Command Line Interface (PDF)

This How To Note shows you how to configure some key features that allow AlliedWare Plus switches to control a VoIP network, using phones from different manufacturers.

This How To Note describes how RSTP and MSTP on Allied Telesis switches interoperate with the proprietary PVST+ and rapid PVST+ protocols on Cisco switches.

User Guide: CLI 9000 Series Gigabit Ethernet Switches, AlliedWare Plus v2.4.1.0

User Guide: AT-8000S Series CLI V3.0.0.45

This guide contains instructions on how to use the AT-S111 Management Software to manage and monitor the AT-GS950/48PS Gigabit Ethernet PoE+ Switch.

This guide contains instructions on how configure an AT-8000 Series Fast Ethernet Switch using the AT-S39 command line interface.

This guide contains instructions on how to use the AT-S112 Management software to manage and monitor the AT-GS950/16PS Gigabit Ethernet Switch.

This guide contains instructions on how to configure the FS970M Series switches with the command line interface (v2.3.1).

This guide describes the AlliedWare Plus™ Bi-directional Forwarding Detection (BFD) over Ethernet for Layer 2 Redundancy Protocols and how to configure it.

This guide contains instructions on how to configure an AT-8324SX Fast Ethernet Switch using the AT-S29 management software.

This user guide on how to use the AT-S25 management software version 2.0.2 is supported on the following Allied Telesyn Fast Ethernet switches: AT-8316F/MT AT-8316F/VF AT-8316F/SC AT-8324

This user guide on how to use the AT-S24 management software version 2.01 is supported on the following Allied Telesyn Fast Ethernet switches: AT-8216FXL AT-8224XL AT-8288XL