Document Library

This guide provides an introduction to Power over Ethernet technology, the PoE standards, PoE devices, and how to configure PoE on your switch.

This guide describes Media Redundancy Protocol (MRP) and how to configure it.

Today’s distributed video surveillance networks can require a large number of switches, which each connect to a group of cameras. This type of deployment can significantly increase the workload of network administrators, therefore it is desirable to have a...

This document describes the mirroring functionality of AlliedWare Plus switches: port mirroring and remote-mirroring

This guide describes GVRP (Generic VLAN Registration Protocol).

This guide describes the Eco-friendly feature which reduces a switch's power consumption by: turning off power to port LEDs when they are not in use and implementing IEEE 802.3az to put ports into a Low-Power Idle mode.

This guide describes STP, RSTP, and MSTP, and their configuration on AlliedWare Plus™.

This guide provides information about DHCP snooping for IPv4.

This guide describes the Routing Information Protocol (RIP) and its configuration on AlliedWare Plus™.

This guide describes cable diagnostic tools and how to use them: Cable Fault Locator (CFL), Optical Digital Diagnostic Monitoring (DDM) and Active Fiber Monitoring.

This guide describes alarm monitoring and its configuration on AlliedWare Plus TM .

This guide describes Ping polling and its configuration on AlliedWare Plus™.

Precision Time Protocol (PTP) is an Ethernet or IP-based protocol for synchronizing time clocks on a collection of network devices using a Transmitter/Receiver distribution mechanism.

This guide describes PIM-SM and PIM-SSM for IPv4, and their configuration on AlliedWare Plus™.

This guide describes PIM-DM and its configuration on AlliedWare Plus™.

This guide describes ACLs (Access Control Lists) and their configuration on AlliedWare Plus™.

This guide describes the AlliedWare Plus Link Aggregation feature and its configuration.

This guide describes IGMP/MLD and its configuration on AlliedWare Plus™.

This guide describes the route selection process used by AlliedWare Plus™.

This guide describes the startup process used by AlliedWare Plus™ devices.