IE200 Series

Industrial Ethernet Layer 2 Managed Switches

A rugged solution delivering high performance, security, reliability and ease of management to IoT edge, surveillance and transportation systems.

Overview

  • Easily managed through Web GUI, SNMP, Telnet, SSH or Allied Telesis Autonomous Management Framework™ (AMF)
  • Operating temperature range between -40°C and 75°C—ideal for industrial and outdoor deployments
  • The PoE sourcing equipment allows for lower total cost of ownership
  • Supports both Gigabit and Fast Ethernet Small Form-factor Performance Pluggables (SFPs)
  • An ideal option for integrating management into any network solution

Key Features

  • IEEE 802.3at PoE+ sourcing (30W)
  • AlliedWare Plus™ feature-rich operating system
  • AMF node
  • USB port for image/configuration backup, restore, and upgrade
  • Ethernet Protection Switched Ring (EPSRing™) (RFC3619) to reduce network impact <50ms
  • STP, RSTP and MSTP for better redundancy
  • Superior security mechanism including SSL,SSH, 802.1X, MAC, IP filtering, RADIUS, TACACS+ and VLAN for access protection
  • IPv6 management for up-to-date requirements
  • Reliable and accurate QoS support
  • Internal DC/DC electrical isolation

Certifications and Compliance

IPv6 Ready Logo

IPv6 Ready

Run by the IPv6 Forum, IPv6 Ready certification demonstrates conformance to IPv6 standards and validates interoperability of IPv6 products.

Specifications

Product 10/100T (RJ-45) Copper Ports 10/100/1000T (RJ-45) Copper Ports 100/1000X SFP Ports Switching Fabric Forwarding Rate (64-Byte Packets) PoE Sourcing Ports PoE Budget
IE200-6FP 4 - 2 4.8Gbps 3.57Mpps 4 120W
IE200-6FT 4 - 2 4.8Gbps 3.57Mpps - -
IE200-6GP - 4 2 12.0Gbps 8.93Mpps 4 120W
IE200-6GT - 4 2 12.0Gbps 8.93Mpps - -

Physical

Product Width x Depth x Height Weight Enclosure Mounting Protection Rate
IE200-6FP 95 x 159 x 134 mm
(3.74 x 6.25 x 5.28 in)
1.5 Kg (3.2 lb) Aluminium shell DIN rail, wall mount IP30
IE200-6FT 55 x 159 x 134 mm
(2.17 x 6.25 x 5.28 in)
0.9 Kg (2.0 lb) Aluminium shell DIN rail, wall mount IP30
IE200-6GP 95 x 159 x 134 mm
(3.74 x 6.25 x 5.28 in)
1.5 Kg (3.2 lb) Aluminium shell DIN rail, wall mount IP30
IE200-6GT 55 x 159 x 134 mm
(2.17 x 6.25 x 5.28 in)
0.9 Kg (2.0 lb) Aluminium shell DIN rail, wall mount IP30

Power Characteristics

      No PoE Load*
Product Input Voltage Cooling Max Power Consumption Max Heat Dissipation Noise
IE200-6FP 24~48V DC Fanless 23W 79 BTU/hr -
IE200-6FT 12~48V DC Fanless 10W 35 BTU/hr -
IE200-6GP 24~48V DC Fanless 23W 79 BTU/hr -
IE200-6GT 12~48V DC Fanless 10W 35 BTU/hr -

* The Max Power consumption at full PoE load includes PD’s consumption and margin. The cooling requirements of the switch are smaller than the power draw, because most of the load is dissipated at the PoE powered device (PD) and along the cabling.

Use these wattage and BTU ratings for facility capacity planning.

Power over Ethernet

  Full PoE Load   Max PoE Sourcing Ports
Product Max Power Consumption Max Heat Dissipation Noise Max PoE Power PoE (15W) PoE+ (30W)
IE200-6FP 144W 79 BTU/hr - 120W 4 4
IE200-6FT - - - - - -
IE200-6GP 144W 79 BTU/hr - 120W 4 4
IE200-6GT - - - - - -

Ordering Information

AT-IE200-6FP-80

4 x 10/100T, 2 x 100/1000X SFP,
Industrial Ethernet, Layer 2 Switch, PoE+ Support

AT-IE200-6FT-80

4 x 10/100T, 2 x 100/1000X SFP,
Industrial Ethernet, Layer 2 Switch

AT-IE200-6GP-80

4 x 10/100/1000T, 2 x 100/1000X SFP,
Industrial Ethernet, Layer 2 Switch, PoE+ Support

AT-IE200-6GT-80

4 x 10/100/1000T, 2 x 100/1000X SFP,
Industrial Ethernet, Layer 2 Switch

The DIN rail and wall mount kits are included.

Feature Licenses

Name Description Includes
AT-FL-IE2-L2-01 IE200 series Layer 2 Premium license* VLAN double tagging (QinQ)
UDLD
AT-FL-IE2-8032 IE200 series license for ITU-T G.8032 and Ethernet CFM ITU-T G.8032
Ethernet CFM

* EPSR Master feature is available by default in IE200 Series

Resources

Video: Multicast Fundamentals
Multicast Fundamentals
Video: Simplifying Remote LAN Management
Simplified Remote LAN Management with AMF