IE200 Series

Industrial Ethernet Layer 2 Managed Switches

A rugged solution delivering high performance, security, reliability and ease of management to IoT edge, surveillance and transportation systems.


  • Easily managed through Web GUI, SNMP, Telnet, SSH or Allied Telesis Autonomous Management Framework™ (AMF)
  • Operating temperature range between -40°C and 75°C—ideal for industrial and outdoor deployments
  • The PoE sourcing equipment allows for lower total cost of ownership
  • Supports both Gigabit and Fast Ethernet Small Form-factor Performance Pluggables (SFPs)
  • An ideal option for integrating management into any network solution

Key Features

  • IEEE 802.3at PoE+ sourcing (30W)
  • AlliedWare Plus™ feature-rich operating system
  • AMF node
  • USB port for image/configuration backup, restore, and upgrade
  • Ethernet Protection Switched Ring (EPSRing™) (RFC3619) to reduce network impact <50ms
  • STP, RSTP and MSTP for better redundancy
  • Superior security mechanism including SSL,SSH, 802.1X, MAC, IP filtering, RADIUS, TACACS+ and VLAN for access protection
  • IPv6 management for up-to-date requirements
  • Reliable and accurate QoS support
  • Internal DC/DC electrical isolation

Certifications and Compliance

IPv6 Ready Logo

IPv6 Ready

Run by the IPv6 Forum, IPv6 Ready certification demonstrates conformance to IPv6 standards and validates interoperability of IPv6 products.


Product10/100T (RJ-45) Copper Ports10/100/1000T (RJ-45) Copper Ports100/1000X SFP PortsSwitching FabricForwarding Rate (64-Byte Packets)PoE Sourcing PortsPoE Budget


ProductWidth x Depth x HeightWeightEnclosureMountingProtection Rate
IE200-6GT55 x 159 x 134 mm
(2.17 x 6.25 x 5.28 in)
0.9 Kg (2.0 lb)Aluminium shellDIN rail, wall mountIP30

Power Characteristics

ProductInput VoltageCoolingNo PoE Load* Max Power ConsumptionNo PoE Load* Max Heat DissipationNo PoE Load* Noise
IE200-6GT12~48V DCFanless32W109 BTU/hr-

* The Max Power consumption at full PoE load includes PD’s consumption and margin. The cooling requirements of the switch are smaller than the power draw, because most of the load is dissipated at the PoE powered device (PD) and along the cabling.

Use these wattage and BTU ratings for facility capacity planning.

Power over Ethernet

ProductFull PoE Load Max Power ConsumptionFull PoE Load Max Heat DissipationFull PoE Load NoiseMax PoE Power15W Max PoE Sourcing Ports30W PoE+ Max PoE Sourcing Ports


Ordering Information


4 x 10/100/1000T, 2 x 100/1000X SFP,
Industrial Ethernet, Layer 2 Switch

Power Supplies


50W @48Vdc, Industrial AC/DC power supply,
DIN rail mount


240W @48Vdc, Industrial AC/DC power supply,
DIN rail mount (5 years warranty)


240W @48Vdc, Industrial AC/DC power supply,
DIN rail mount

The DIN rail and wall mount kits are included.

Feature Licenses

AT-FL-IE2-L2-01IE200 series Layer 2 Premium license*VLAN double tagging (QinQ)
AT-FL-IE2-8032IE200 series license for ITU-T G.8032 and Ethernet CFMITU-T G.8032
Ethernet CFM

* EPSR Master feature is available by default in IE200 Series

All Models



Related Videos

Continuous PoE

Video: How Active Fiber Monitoring Protects Your Data

Video: Total Autonomous Networking