Document Library

This guide contains an introduction to the RIPng protocol and a basic RIPng configuration example.

This guide describes alarm monitoring and its configuration on AlliedWare Plus TM .

This guide describes the file storage options that AlliedWare Plus™ supports and the commands available for managing files.

This guide describes Ping polling and its configuration on AlliedWare Plus™.

This guide describes PIM-SM and PIM-SSM for IPv4, and their configuration on AlliedWare Plus™.

This guide describes Virtual LANs (VLANs), VLAN features and their configuration on AlliedWare Plus™.

This guide describes the startup process used by AlliedWare Plus™ devices.

This guide describes PIM-DM and its configuration on AlliedWare Plus™.

This guide describes GVRP (Generic VLAN Registration Protocol).

This guide describes PIM-SM for IPv6, and its configuration on AlliedWare Plus™.

This guide describes sFLOW and its configuration on AlliedWare Plus™.

This guide describes RMON and its configuration on AlliedWare Plus™.

This guide describes Link Layer Discovery Protocol (LLDP) and its configuration on AlliedWare Plus™.

This guide describes the Eco-friendly feature which reduces a switch's power consumption by: turning off power to port LEDs when they are not in use and implementing IEEE 802.3az to put ports into a Low-Power Idle mode.

This guide describes STP, RSTP, and MSTP, and their configuration on AlliedWare Plus™.

This guide describes how to use RADIUS to authenticate users of AlliedWare Plus™ devices.

This guide describes the AlliedWare Plus Link Aggregation feature and its configuration.

This guide describes the Routing Information Protocol (RIP) and its configuration on AlliedWare Plus™.

This guide describes cable diagnostic tools and how to use them: Cable Fault Locator (CFL), Optical Digital Diagnostic Monitoring (DDM) and Active Fiber Monitoring.

This guide describes ACLs (Access Control Lists) and their configuration on AlliedWare Plus™.