Recommended Settings for TQ5000/6000 Series

Appendix > Recommended Settings for TQ5000/6000 Series

When designing a cell-based (non-blanket) or AWC-CB wireless LAN using TQ5403/5403e/6602 and TQm5403, the following settings are recommended to ensure a stable wireless network.
Default settings are recommended for setting items not listed in this table. These are only recommended values, and you may need to adjust the settings depending on your environment.

Table 1: Recommended Settings for TQ5000/6000 Series
Item Name	Options included in	Scope of setting	Cell-based		AWC-CB		Comment
Item Name	Options included in	Scope of setting	TQ5403 TQm5043 TQ5403e	TQ6602	TQ5403 TQ5403e	TQ6602	Comment
Management Group	Management Group	-	Registered APs per management group: 50 or less
Neighbor Managed AP Detection	AWC Settings	Whole AP	Disable when AWC Auto calc is not used		Disable when AWC Auto calc is not used
Airtime Fairness	AP Profile	Per Band	Disable (default)		Disable (required, default)
Legacy Rate Sets	AP Profile	Per Band	Disable 1, 2Mbps for 2.4GHz		Disable 1, 2Mbps for 2.4GHz
RTS Threshold	AP Profile	Per Band	2347 (default)		2347 (required, default)
Band Steering	AP Profile	Whole AP	Disable (default)		Disable (required, default)
NoAck	-	Per Band	Disable (default)	Enable (default)	Disable (default)	Enable (default)	If an AP that has been used as a standalone is added to the management, check the settings on the Web GUI of the AP itself (Settings > QoS) and change them to the defaults shown on the left.
APSD	AP Profile	Per Band	Disable (default)	Enable (default)	Disable (default)	Enable (default)
Neighbor AP Detection	AP Profile	Per Band	Disable when Neighbor AP Detection is disabled and AWC Auto Calc is set to low precision or is disabled		Disable (required)
MU-MIMO	AP Profile	Per Band	-	Disable (default)	-	Not Supported, Disable (required, default)
OFDMA	AP Profile	Per Band	-	Disable (default)	-	Not Supported, Disable (required, default)
Management Frame Protection	AP Profile/ CB Profile	Per VAP	Disable		Disable
Broadcast Key Refresh Rate	AP Profile/ CB Profile	Per VAP	0 (default)		Not Supported, 0 (required, default)
RADIUS Accounting	AP Profile/ CB Profile	Per VAP	Disable (default)		Not Supported, Disable (required, default)
Dynamic VLAN	AP Profile/ CB Profile	Per VAP	Disable		Not Supported, Disable (required)		Standalone AP: Disabled by default AP Profile: Enabled by default CB Profile: Always disabled
Fast Roaming	AP Profile/ CB Profile	Per VAP	Disable (default)		Not Supported, Disable (required, default)
Inactivity Timer	AP Profile/ CB Profile	Per VAP	300 (default)		Not Supported, 300 (required, default)
Duplicate AUTH received	AP Profile/ CB Profile	Per VAP	Ignore		Ignore
Association Advertisement	AP Profile/ CB Profile	Per VAP (in the case of AWC-CB, all CB VAPs in the relevant radio band.)	Enable		Enable (required)
DTIM Period	AP Profile/ CB Profile	Per VAP	Normal: 1 (default)		Normal: 1 (default) When expecting to reduce device battery consumption: 3
Proxy ARP	AP Profile/ CB Profile	Per VAP (in the case of AWC-CB, all CB VAPs in the relevant radio band.)	Disable for data communication Enable for IP telephony system		Enable (required)
RSSI Threshold	CB Profile	All CB-VAPs	-		30

C613-04121-00 Rev A

26 Mar 2022 18:28