Building Distributed Network Cores with Allied Telesis Switches

SOLUTION GUIDE

Modern networks have become a fundamental component of the way we interact and conduct business. A highly reliable and high performing network is now essential in most activities, from education to data management to commerce.

Today’s students make use of technology like never before, and access to online resources and applications is seen as an integral part of the learning experience. Lectures on demand, online e-learning activities and access to the Internet are expected norms in a campus environment.

Businesses also rely on online resources more than ever, with everything from standard access to email and servers, to business critical applications requiring a high availability network. This is even more pronounced where data storage is employed. Access to important information must be continuous. Multiple copies of critical data are often kept to guarantee availability and minimize any possibility of loss.

Allied Telesis provides advanced distributed network core solutions, which ensure data availability in campus environments, and also for businesses utilizing data and service replication between separate sites.

 

Distributed Network Cores

The decision to implement the network core in a physically distributed form can be driven by simple considerations of feasibility, and/or by the requirements of disaster recovery.

In a campus environment, it is frequently not feasible for the network core to be in a single physical location. Departments as diverse as engineering, graphic design, science and administration all require large volume online storage and applications. Separate localized servers are often employed to meet specialized needs, and differing service requirements. Therefore, it is often natural for a campus network to consist of a distributed set of network cores, with high-speed, resilient connectivity between the individual sub-cores. This is shown in the diagram below.

The requirements of disaster recovery lead to network cores, and even network operation centers, being duplicated at 2 or more physically separated locations. This provides consistent availability of information and the knowledge that critical data is always right there when it’s required. Complete data and service replication between the separate sites enable operations to continue even if one (or more) of the sites is completely out of service. The speed and reliability of the data replication between the sites is critical to the success of a disaster recovery solution. If there are significant discrepancies between the data sets at the different sites, then failover will not be seamless.

Distributed network core solutions require high performance and high availability, without adding unnecessary layers of complexity to the network or its management. The ideal network for a distributed core environment will provide additional reliability and performance, while maintaining ease of use.

Campus Network

Distributed Core Solutions

Technologies

Allied Telesis provides two technologies upon which a distributed network core can be built:

  • EPSR
  • VCStack LD

Let us first take a brief overview of each of these technologies, and then move on to consideration of the benefits that each technology provides.

EPSR

Ethernet Protection Switching Ring (EPSR) is a mechanism for preventing data loops in ring topologies. It has a very fast recovery time in the event of broken links or switches going out of service. The recovery time can be as low as 50ms.

As well as EPSR, Allied Telesis switches also support the standards-based G.8032 Ethernet Ring Protection Switching (ERPS) protocol. G.8032 ring protection can be deployed standalone, or can interoperate with an EPSR network.

EPSR can be implemented on any Ethernet ring—and be run on links utilizing today’s fastest Ethernet standards, right up to 100Gbps.

The network topology within which EPSR can operate is not confined to a single ring. The SuperLoop Protection feature, an extension of EPSR, enables it to operate across a more complex topology. It can operate on multiple rings, with multiple connection points between any pair of rings. This provides a very flexible solution that can be tailored to suit any scenario.

The diagram below shows EPSR used in a campus environment, with multiple rings providing high-speed connectivity between the various departments.

 

Long-distance stacking (VCStack LD)

With Virtual Chassis Stacking (VCStack), Allied Telesis provides a truly resilient network. In normal operation, all bandwidth and all routing power in the network are fully available for use all the time. If a link or device fails, some of the bandwidth or forwarding power will be lost, but the network will still be fully operational and all remaining resources will continue to be fully utilized.

VCStack LD enables the VCStack solution to provide a distributed network core. The increased distance provided by fiber stacking connectivity means that members of the virtual chassis do not have to be collocated. Instead, they can be kilometers apart. The distance is limited only by the capabilities of the pluggable devices that are driving the signal down the fiber cables that connect the switches.

All of the benefits and powerful features of VCStack remain exactly the same. So the switches in a VCStack LD solution all operate as a single switch—with completely shared software and hardware forwarding tables, a single shared configuration script, support for link aggregation and port mirroring between stack members and so on.

The diagram below shows VCStack LD used to connect 2 mirrored data centers together. This single virtual distributed core ensures high availability of data for network users.

Data mirroring solution using VCStack LD