Dashboard

Screen Reference > Dashboard

Network Overview

Network Trend

Device List By Importance

Event List

Network Overview

"Network Overview" summarizes the current overall status of the monitored devices.

Table 1: Network Overview
Item Name	Description
Doughnut Chart	Shows percentages of the monitored devices in UP (green) and DOWN (red) states.
X nodes	Shows the number of monitored devices.
X up	Shows the number of monitored devices in UP state (Reachable from the SNMP Plug-in server).
X down	Shows the number of monitored devices in DOWN state (Unreachable from the SNMP Plug-in server).
X traps	Shows the number of monitored devices from which the SNMP Plug-in received SNMP traps.

Network Trend

"Network Trend" shows the trends of various data using a line chart (with 1 hour interval) such as the numbers of monitored devices in UP and DOWN states, the number of monitored devices sending traps and the amount of traffic sent/received by monitored devices.

Note
When the monitored device is registered, if it fails to communicate with the SNMP plug-in, the trend graphs will not be updated. When registering a monitored device, please make sure that it can communicate properly before deleting or adding the device.

Note
If the CPU or memory usage is high, the SNMP Plug-in may fail to update the Network Trend. In that case, please wait for the next update.

When you hovering a mouse cursor over the chart, exact numbers at the point will be popped up.

You can change the data to display on the chart by clicking a button at the top right corner. The following trends can be seen on the chart.

Table 2: Network Trend
Item Name	Description
UP/DOWN	Shows the numbers of the monitored devices in UP (green) and DOWN (red) states.
SNMP Traps	Shows the number of monitored devices from which the SNMP Plug-in received SNMP traps.
Total Bytes	Shows the total bytes sent/received by the monitored devices.

Device List By Importance

"Device List By Importance" summarizes information about the monitored device with "High" or "Medium" Importance.
"Traffic", "In" and "Out" show the latest measured traffic counts(bytes) for each device. They are measured at one hour interval.

Note
The importance of a device is based on the device level defined for each product model. Device levels can be configured with Server Configuration > Device Level Configuration Utility. Each device's importance is determined when it is added. Even if you change the device level configuration, the new level settings will not be applied to the existing devices. To apply the new level mappings, delete the devices and add them again.

Table 3: Device List By Importance
Item Name	Description
Filter by tag	You can filter devices in the list by clicking a button at the top right corner. The following filter conditions are available. No Filtering Applies no filtering. UP Only shows the important devices in UP state. DOWN Only shows the important devices in DOWN state. Trap Received Only shows the important devices from which the SNMP Plug-in received SNMP traps.
Status	Shows the device status with an icon. If SNMP Plug-in received SNMP traps from a device, the device's icon is highlighted with pink. Refer to Appendix > List of Icons" > "Status Icons for details on status icons.
Name	Shows the device name.
Importance	Shows the importance of the device. It is automatically assigned to the device depending on its product model's device level.
Traffic	Shows the total number of bytes sent/received by the device.
In	Shows the number of bytes received by the device.
Out	Shows the number of bytes sent by the device.
Details	Moves to Device Details page for the device.

Event List

"Event Log" shows the last 30 event logs.

Table 4: Event List
Item Name	Description
Filter by tag	You can filter event logs shown in the list by clicking a button at the top right corner. The following filter conditions are available. No Filtering Applies no filtering. Shows all 30 latest event logs. Error Logs Only shows error logs. Trap Logs Only shows trap logs. Info Logs Only shows info logs.
Event Date/Time	Shows the date/time of the event
Source Name	Shows the event source name such as node name where the event occurred.
Model Name	Shows the model name of the event source (when the source is a device).
Event Name	Shows a type of the event.
Message	Shows a descriptive message for the event.
Details	Moves to Event Log Details page for the event.

C613-04155-00 Rev A

06 Sep 2023 11:35