Other Nodes

This section covers the pages for viewing and changing nodes under the device, namely Ports, Stacks, Chassis and Slots.
Pages for those node types have the almost same layout.
We use the pages for Ports as examples.

Port

Port pages allows you to view details on a port or edit its attributes.

Port Details

You can open "Port Details" page by selecting a port on the Tree View and clicking a port name in the node attribute section on the Device Tree View page.
"Port Details" page shows its attributes and a event list.

Port Attributes

Table 1: Port Attributes
Item	Content
"Gear" icon	Clicking "Gear" icon shows the "Clear Notfication Flags" submenu for the port. You can use the "Clear Notfication Flags" to clear a trap icon on the node.
Name	Shows a configurable name of the port.
Description	Shows a comment configured for the slot.
Port #	Shows the port number.
Network Address	Shows an IPv4 address and a prefix length (xxx.xxx.xxx.xxx/xx format).
Destination MAC Address	Show a MAC address of the port or the device.
Traffic Rate	Shows the port speed (in bps)
Type	Shows the port type.
Status	Shows the port status.
Edit	Opens "Edit Node" page for the node.

Event List

You can see a list of event logs on "Event Log List" page.

Table 2: Port Event List
Item Name	Description
Event Date/Time	Shows the date/time of the event
Source Name	Shows the event source name such as node name where the event occurred.
Model Name	Shows the model name of the event source (when the source is a device).
Event Name	Shows a type of the event.
Message	Shows a descriptive message for the event.
Details	Moves to Event Log Details page for the event.
Page Navigation	Lets you view a specific page of the list. First: Shows the first page. Previous: Shows the previous page. Page Number: When you click a page number, the page will be shown. Current page number is grayed out. Next: Shows the next page. Last: Shows the last page.

Edit Port

You can open "Edit Port" page for the port by clicking the port name in the node attribute section of Port Details page.
"Edit Port" page lets you edit the node attributes of a port.

Table 3: Edit Port
Item	Content
Name	Enter the name of the port. Should be 1 to 255 characters in length, with alphabets, numbers and symbols (space " % , - < > ^ _ ` { \| } ~ can be used).
Description	Enter a comment. Should be no more than 1,024 characters in length, with alhabets, numbers, and symbols (including spaces).
"Save" button	Saves changes to the port attributes and moves to "Port Details" page.

Stack

Stack pages allows you to view details on a stack or edit its attributes.

Stack Details

You can open "Stack Details" page by selecting a stack on the Tree View and clicking a stack name in the node attribute section on the Device Tree View page.
"Stack Details" page shows its attributes and a event list.

Note
Its page layout is the same as the Port Details page.
Its page title indicates the node type.

Stack Attributes

Table 4: Stack Attributes
Item	Content
"Gear" icon	Clicking "Gear" icon shows the "Clear Notfication Flags" submenu for the port. You can use the "Clear Notfication Flags" to clear a trap icon on the node.
Name	Shows a configurable name of the stack.
Description	Shows a comment configured for the slot.
Stack Number	Shows the stack number.
Model Name	Shows the stack model information.
Edit	Opens "Edit Stack" page for the stack.

Event List

You can see a list of event logs on "Event Log List" page.

Table 5: Stack Event List
Item Name	Description
Event Date/Time	Shows the date/time of the event
Source Name	Shows the event source name such as node name where the event occurred.
Model Name	Shows the model name of the event source (when the source is a device).
Event Name	Shows a type of the event.
Message	Shows a descriptive message for the event.
Details	Moves to Event Log Details page for the event.
Page Navigation	Lets you view a specific page of the list. First: Shows the first page. Previous: Shows the previous page. Page Number: When you click a page number, the page will be shown. Current page number is grayed out. Next: Shows the next page. Last: Shows the last page.

Edit Stack

You can open "Edit Stack" page for the stack by clicking the stack name in the node attribute section of Stack Details page.
"Edit Stack" page lets you edit the node attributes of a stack.

Note
Its page layout is the same as Edit Port page.
Its page title indicates the node type.

Table 6: Edit Stack
Item	Content
Name	Enter a name of the stack. Should be 1 to 255 characters in length, with alphabets, numbers and symbols (space " % , - < > ^ _ ` { \| } ~ can be used).
Description	Enter a comment. Should be no more than 1,024 characters in length, with alhabets, numbers, and symbols (including spaces).
"Save" button	Saves changes to the stack attributes and moves to "Stack Details" page.

Chassis

Chassis pages allows you to view details on a chassis or edit its attributes.

Chassis Details

You can open "Chassis Details" page by selecting a chassis on the Tree View and clicking a chassis name in the node attribute section on the Device Tree View page.
"Chassis Details" page shows its attributes and a event list.

Note
Its page layout is the same as the Port Details page.
Its page title indicates the node type.

Chassis Attributes

Table 7: Chassis Attributes
Item	Content
"Gear" icon	Clicking "Gear" icon shows the "Clear Notfication Flags" submenu for the port. You can use the "Clear Notfication Flags" to clear a trap icon on the node.
Name	Shows a configurable name of the chassis
Description	Shows a comment configured for the slot.
Chassis Number	Shows the chassis number.
Model Name	Shows the chassis model information.
Edit	Opens "Edit Chassis" page for the chassis.

Event List

You can see a list of event logs on "Event Log List" page.

Table 8: Chassis Event List
Item Name	Description
Event Date/Time	Shows the date/time of the event
Source Name	Shows the event source name such as node name where the event occurred.
Model Name	Shows the model name of the event source (when the source is a device).
Event Name	Shows a type of the event.
Message	Shows a descriptive message for the event.
Details	Moves to Event Log Details page for the event.
Page Navigation	Lets you view a specific page of the list. First: Shows the first page. Previous: Shows the previous page. Page Number: When you click a page number, the page will be shown. Current page number is grayed out. Next: Shows the next page. Last: Shows the last page.

Edit Chassis

You can open "Edit Chassis" page for the chassis by clicking the chassis name in the node attribute section of Chassis Details page.
"Edit Chassis" page lets you edit the node attributes of a chassis.

Note
Its page layout is the same as Edit Port page.
Its page title indicates the node type.

Table 9: Edit Chassis
Item	Content
Name	Enter a name of the chassis. Should be 1 to 255 characters in length, with alphabets, numbers and symbols (space " % , - < > ^ _ ` { \| } ~ can be used).
Description	Enter a comment. Should be no more than 1,024 characters in length, with alhabets, numbers, and symbols (including spaces).

Slot

Slot pages allows you to view details on a slot or edit its attributes.

Slot Details

You can open "Slot Details" page by selecting a slot on the Tree View and clicking a slot name in the node attribute section on the Device Tree View page.
"Slot Details" page shows its attributes and a event list.

Note
Its page layout is the same as the Port Details page.
Its page title indicates the node type.

Slot Attributes

Table 10: Slot Attributes
Item	Content
"Gear" icon	Clicking "Gear" icon shows the "Clear Notfication Flags" submenu for the port. You can use the "Clear Notfication Flags" to clear a trap icon on the node.
Name	Shows a configurable name of the slot. When the slot was auto-discovered, it was named in the form of "slot<slot-number>" such as "slot1". On some models, there may be a slot with a name in different format.
Description	Shows a comment configured for the slot.
Slot Number	Shows the slot number.
Model Name	Shows the slot model information.
Edit	Opens "Edit Slot" page for the slot.

Event List

You can see a list of event logs on "Event Log List" page.

Table 11: Slot Event List
Item Name	Description
Event Date/Time	Shows the date/time of the event
Source Name	Shows the event source name such as node name where the event occurred.
Model Name	Shows the model name of the event source (when the source is a device).
Event Name	Shows a type of the event.
Message	Shows a descriptive message for the event.
Details	Moves to Event Log Details page for the event.
Page Navigation	Lets you view a specific page of the list. First: Shows the first page. Previous: Shows the previous page. Page Number: When you click a page number, the page will be shown. Current page number is grayed out. Next: Shows the next page. Last: Shows the last page.

Edit Slot

You can open "Edit Slot" page for the slot by clicking the slot name in the node attribute section of Slot Details page.
"Edit Slot" page lets you edit the node attributes of a slot.

Note
Its page layout is the same as Edit Port page.
Its page title indicates the node type.

Table 12: Edit Slot
Item	Content
Name	Enter a name of the slot. Should be 1 to 255 characters in length, with alphabets, numbers and symbols (space " % , - < > ^ _ ` { \| } ~ can be used).
Description	Enter a comment. Should be no more than 1,024 characters in length, with alhabets, numbers, and symbols (including spaces).
"Save" button	Saves changes to the slot attributes and moves to "Slot Details" page.

C613-04155-00 Rev A

06 Sep 2023 11:35